Face Shields
Face shields designed to provide secondary face/eye protection; must be worn over approved glasses or goggles; available in disposable and reusable models constructed of acetate, propionate, and/or polycarbonate. Regulatory compliance details can be obtained at the individual product level.
Face shields are intended as secondary face and eye protection when worn in addition to protective glasses or goggles.
Some face shields can be worn with an adjustable headband for stand-alone use. Others are made with slots that can be attached to a hood, cap, hardhat, or other headgear.
Half-face shields cover the upper half of the face and may serve as an integral part of disposable face masks, protecting the eyes as well as the nose and mouth.
Available in disposable and reusable models, face shields are often constructed of acetate, propionate, and polycarbonate materials. The plastic shield may also be:
- Clear for greater visibility
- Tinted to reduce glare
- Metallic plated for heat resistance
Many face shields have abrasion-resistant external surfaces and their internal surfaces may be treated to reduce fogging during wear.
Face shields are available in a range of thicknesses to protect against specific hazards and may be rated for performance, safety, and other regulatory compliance requirements.
Medicus Health FLEX ARM SAFETY SPLASH SHIELD, 24" WHITE GOOSENECK ARM
∙ Flex Arm Safety Splash Shield with 18" Gooseneck Arm and C-clamp mounting base allows for precise positioning∙Flat Splash Shield mounted on a white vinyl coated flexible arm ∙Ultimate in flexibility for optimum protection with a 10" x 10" flat shield∙18" White Gooseneck arm allows for precise positioning. ∙ 10” x 10” flat shield is mounted diagonally so it adds another 13” to the overall length of the shield.∙Coated arm is easy to clean and keep clean∙Durable, scratch-resistant polycarbonate shield protects you from splashes, aerosol mist, and flying debris∙Helps meet compliance with OSHA bloodborne pathogen regulations (29 CFR Part 191.1030)∙C-clamp mount is padded to protect your desk or bench top from scratches and can be mounted on a surface up to 2" thick∙To create a permanent mount, simply remove the C-clamp and fasten to any solid surface
Ace Glass, Inc. 57mm ID 33.5cm long acrylic safety shield without the use with Michel-Miller chromatography columns.
57mm I.D. x 33.5cm L Acrylic Safety Shield without cap, for use with Michel-Miller chromatography columns. Safety shield insures safe operation at pressures to 300 psi. Shield wall thickness: 3mm. The top thread of the column is hung in a polyethylene cap; the cap is then held by the plastic shield. The shield should be secured with a clamp.
MSC Honeywell Faceshield Visor, Clear Propionate, 8.5x15x.07 in, 1 ea
This propionate faceshield replacement visor provides reliable protection and is designed for use in chemical-resistance applications. It features an easy attachment system and a reinforced edge to resist cracking, ensuring durability and user safety.
- Easy attachment without snaps, posts or levers
- Reinforced edge to resist cracking
- Universal hole pattern
- More flexible and appropriate in chemical-resistance applications
- Chemical splash drip edge to prevent fluids from splashing down inside the visor
- Meets ANSI Z87+ (High Impact) standard
- Tested to meet the requirements of the CSA Z94.3 standard